How To Change Computer Ip Address Windows 7

Sometimes, it's better to assign a PC it's own IP accost rather than letting your router assign i automatically. Join us as we take a await at assigning a static IP address in Windows.

Static vs. Automatic IP Addressing

Right at present, the IP addresses for your PCs and other devices are probably assigned automatically by your router using a procotol known as Dynamic Host Configuration Protocol (DHCP). It's a handy way for devices to connect to your network more easily, because you don't have to configure IP addressing for each new device yourself. The downside to automatic addressing is that it'south possible for a device's IP address to change from time to time.

Mostly, that's not a large deal, merely there are times that you might want a device to take a static, unchanging IP address. For example:

• You have a device (similar a dwelling media server, say) that you want to exist able to detect reliably and you lot (or other devices) prefer to locate it by IP address. Using IP addresses is often much handier when troubleshooting your network, for example.
• You take sure apps that can only connect to network devices using their IP address. In particular, many older networking apps suffer this limitation.
• Y'all forward ports through your router to devices on your network. Some routers play overnice with port forwarding and dynamic IP addresses; others do non.

Whatever your reason, assigning static IP addresses to devices is not difficult, but y'all exercise have a choice to make—whether to do information technology from the router or on the device itself.

Assign Static IP Addresses Via Your Router

While this article covers assigning static IP addresses to PCs within Windows itself, at that place is some other way to go about it. Many routers allow you to assign a pool of IP addresses that are handed out to specific devices (based on the device's physical, or MAC address). This method offers a couple of significant advantages:

• IP addresses are still managed by the router, significant that you won't accept to make (and go along up with) changes on each individual device.
• It's easier to assign addresses within the same IP accost pool your router uses.

RELATED: How to Ready Static IP Addresses On Your Router

This article is virtually assigning static IP addresses straight to PCs running Windows. Nosotros've already got a nifty guide on How to Set Static IP Addresses On Your Router, so if that's the mode you want to go, be sure to give it a read.

With all that in mind, though, let'southward take a look at how to assign static IP addresses within Windows XP, Vista, seven, viii, and x.

Set a Static IP Address in Windows 7, 8, or 10

To alter the reckoner's IP address in Windows, you'll demand to open up the "Network Connections" window. Hit Windows+R, type "ncpa.cpl" into the Run box, and so striking Enter.

In the "Network Connections" window, right-click the adapter for which you desire to set a static IP address, and then select the "Properties" control.

In the properties window for the adapter, select "Internet Protocol Version four (TCP/IPv4)" and so click the "Backdrop" button.

Select the "Use the following IP address" option, so type in the IP address, subnet mask, and default gateway that corresponds with your network setup. Side by side, blazon in your preferred and alternate DNS server addresses. Finally, select the "Validate settings upon exit" pick so that Windows immediately checks your new IP accost and respective data to ensure that it works. When you're fix, click the "OK" push.

And and so close out of the network adapter's backdrop window.

Windows automatically runs network diagnostics to verify that the connection is practiced. If in that location are problems, Windows will give you the option of running the Network troubleshooting wizard. However, if you do run into trouble, the wizard probable won't practise yous too much expert. Information technology's better to bank check that your settings are valid and try again.

Set a Static IP Address in Windows Vista

Changing your IP from DHCP to a Static address in Vista is similar to other versions of Windows, but getting to the right location is a scrap unlike. Open the Commencement Menu, right-click on Network, and select Properties.

The Network and Sharing Center opens…click on Manage network connections.

Right-click on the network adapter y'all want to assign an IP address and click Backdrop.

Highlight Internet Protocol Version iv (TCP/IPv4) so click the Properties push button.

Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When yous're finished click OK.

You'll need to shut out of Local Area Connexion Properties for the settings to go into effect.

Open up the Command Prompt and use the ipconfig command to verify that the changes were successful.

Set a Static IP Accost in Windows XP

To ready a Static IP in Windows XP, correct-click the "My Network Places" icon, and then select "Properties."

Right-click the adapter for which you want to set up the IP, and then select "Properties" from the context menu.

Select the "Internet Protocol (TCP/IP)" entry, and then click the "Properties" push button.

Select the "Employ the post-obit IP address" pick. Blazon in the IP address, subnet mask, default gateway, and DNS server addresses yous want to use. When you're finished, click the "OK" push.

You will need to shut out of the adapter'southward properties window before the changes go into event.

And you tin verify your new settings by using the ipconfig control at the command prompt.

---

More often than not, it'southward better to let most of your devices have their IP addresses assigned automatically by your router. Occasionally, though, you might want to set a static IP address for a particular device. While y'all can set static IP addresses straight on your devices (and this article has shown you how to exercise just that on Windows PCs), we still recommending setting up static IP addressing on your router if possible. It will just make life easier.

Source: https://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/

Posted by: johnstontiledgets.blogspot.com

Share this post